Skanna dokument: Felsökning
Välkommen till vår guide för felsökning av felmeddelanden som kan uppstå när du använder din skanningsenhet.
Täckt här:
Ingen skanningsenhet hittades
If you see a “No scanning device was found” error message while configuring your scanner to use our Scan to TaxDome feature, it is most likely because the scanner doesn’t support our drivers. The scanner must be compatible with a WIA or TWAIN driver.
TWAIN, an industry standard, is usually included in the software package of a newly purchased scanner—however, not all do.
The following devices don’t support TWAIN: Fujitsu ScanSnap iX100, ScanSnap iX500, ScanSnap S1300i, ScanSnap iX1300, ScanSnap iX1400, ScanSnap iX1500, and ScanSnap iX1600.
If you’d like to use the Scan to TaxDome feature, you’ll need to install a SnapTwain third-party app first.
Jag kan inte skanna dokument från båda sidor
TaxDome Windows Application supports duplex scanning. If you want to scan from both sides (duplex), open your scanning software, then configure the Profile Settings by selecting Duplex for Paper source.
